Получение идентификатора экземпляра, недавно запущенного с помощью ec2-api-tools

Ответ 1

Хорошо, по крайней мере что-то вроде этого должно работать:

instance_id=$(ec2-run-instances ami-dd8ea5a9 [...] | awk '/INSTANCE/{print $2}') 

По общему признанию, я был немного ленив, думая, что быстрее спросить о SO, чем переучивать некоторые основы AWK...: -)

Изменить: упрощенное использование AWK, как предложил Деннис. Кроме того, используя $() вместо `` для ясности и избавляясь от промежуточной переменной.

Ответ 2

Завершая правильный ответ, вот оболочка script, которая создает экземпляр, запускает некоторые команды и удаляет экземпляр. Он использует awk так же, как ваш.

#!/bin/sh

# Creates an Amazon EC2 virtual machine (an instance) and runs some
# shell commands on it before terminating it. Just an example.
# Stephane Bortzmeyer <[email protected]>

# Parameters you can set.
# Choose an AMI you like (ami-02103876 is a Debian "lenny")
AMI=ami-02103876
# Create your key pair first, for instance on the Web interface
KEY=test-b
KEYDIR=.
# The user name to use depends on the AMI. "root" is common but check
# the documentation of the AMI.
USERNAME=root
# Needs to be a legal Unix group of commands
COMMANDS="(uname -a; df -h; cat /etc/debian_version)"
MAX_CONNECTS=4
MAX_TESTS=6

# If you want to change from the default region, set the environment
# variable EC2_URL for instance 'export
# EC2_URL=https://ec2.eu-west-1.amazonaws.com' to use the 'eu-west-1'
# region

# Also, be sure your default security group allows incoming SSH.

if [ "${EC2_PRIVATE_KEY}" = "" ] || [ "${EC2_CERT}" = "" ]; then
    echo "You need to have X.509 certificate and private key locally, and to set the environment variables EC2_PRIVATE_KEY and EC2_CERT to indicate their locations" 1>&2
    exit 1
fi

start=$(ec2-run-instances --key ${KEY} $AMI)
if [ $? != 0 ]; then
    echo "Machine did not start" 1>&2
    exit 1
fi

AMI_E=$(echo "$start" | awk '/^INSTANCE/ {print $3}')
if [ "$AMI_E" != "$AMI" ]; then
    echo "AMI does not match (got $AMI_E instead of $AMI), the machine probably did not start" 1>&2
    exit 1
fi
INSTANCE=$(echo "$start" | awk '/^INSTANCE/ {print $2}')

# I do not find a way to block until the machine is ready. We

# apparently have to poll.
OVER=0
TESTS=0
while [ $OVER != 1 ] && [ $TESTS -lt $MAX_TESTS ]; do
    description=$(ec2-describe-instances ${INSTANCE})
    STATE=$(echo "$description" | awk '/^INSTANCE/ {print $6}')
    NAME=$(echo "$description" | awk '/^INSTANCE/ {print $4}')
    if [ "$NAME" = "" ]; then
        echo "No instance ${INSTANCE} available. Crashed or was terminated." 1>&2
        exit 1
    fi
    if [ $STATE = "running" ]; then
        OVER=1
    else
        # I like bc but 'echo $(( TESTS+=1 ))' should work, too. Or expr.
        TESTS=$(echo $TESTS+1 | bc)
        sleep 2
    fi
done
if [ $TESTS = $MAX_TESTS ]; then
    echo "${INSTANCE} never got to running state" 1>&2
    ec2-terminate-instances ${INSTANCE}
    exit 1
fi
echo "$INSTANCE is running, name is $NAME"
# The SSH server does not seem reachable immediately. We again have to poll
OVER=0
TESTS=0
while [ $OVER != 1 ] && [ $TESTS -lt $MAX_CONNECTS ]; do
    ssh -o "StrictHostKeyChecking no" -i ${KEYDIR}/${KEY}.pem ${USERNAME}@$NAME "${COMMANDS}"
    if [ $? != 255 ]; then
        # It means we connected successfully (even if the remote command failed)
        OVER=1
    else
        TESTS=$(echo $TESTS+1 | bc)
        sleep 3
    fi
done
if [ $TESTS = $MAX_CONNECTS ]; then
    echo "Cannot connect to ${NAME}" 1>&2
fi
ec2-terminate-instances ${INSTANCE}

Ответ 3

Не нужно использовать awk:

# create the instance and capture the instance id
echo "Launching instance..."
instanceid=$(ec2-run-instances --key $pemkeypair --availability-zone $avzone $ami | egrep ^INSTANCE | cut -f2)
if [ -z "$instanceid" ]; then
    echo "ERROR: could not create instance";
    exit;
else
    echo "Launched with instanceid=$instanceid"
fi

из http://www.hulen.com/post/22802124410/unattended-amazon-ec2-install-script

Ответ 4

http://www.tothenew.com/blog/how-to-parse-json-by-command-line-in-linux/
best tool to parse json in shell

#get instance id 
cat sample.json | jq '.Instances[0].InstanceId'|sed -e 's/^"//' -e 's/"$//' 
#check instances is running or not 
cat status.json | jq '.InstanceStatuses[0].InstanceState.Name'|sed -e 's/^"//' -e 's/"$//'