Я установил Jenkins (версия 2.74) и установил брандмауэр-плагин. Создал задание, которое создает брандмауэр и выполняет команду брандмауэра add
vagrant box add test solaris.box
и выполнил команду vagrant up, и VM успешно выполнила задание jenkins.
Но виртуальная машина не отображается в VirtualBox Manager.
В командной строке команда VBoxManage.exe list vms также не перечисляет имя исполняемой виртуальной машины.
Бродячая версия: 1.7.4 Версия VirtualBox: 5.0.12
Вывод командной строки:
D:\>vagrant global-status
id name provider state directory
------------------------------------------------------------------------
ee544e4 default virtualbox running D:/nBOL_VMS/nbolapp
67df2d1 default virtualbox running D:/nBOL_VMS/nbolapptest
206a5c8 default virtualbox running D:/nBOL_VMS/Jenkins-slave
VBoxManage.exe list runningvms
Здесь мой вывод командной строки показывает null, когда я выполняю VBoxManage.exe list runningvms.
Выход Jenkins:
Vagrant global Status :
id name provider state directory
------------------------------------------------------------------------
ee544e4 default virtualbox running D:/nBOL_VMS/nbolapp
67df2d1 default virtualbox running D:/nBOL_VMS/nbolapptest
206a5c8 default virtualbox running D:/nBOL_VMS/Jenkins-slave
VBoxManage list runningvms
"nbolapptest" {bc04dd64-c868-4304-a3b7-eff6d66f862e}
"Jenkins-slave" {c73ead23-ecd7-499d-b5b9-2d52c3b49d7e}
"nbolapp" {4c762312-013e-4ae7-9649-8239abe0f92d}
VBoxManage showvminfo bc04dd64-c868-4304-a3b7-eff6d66f862e
Name: nbolapptest
Groups: /
Guest OS: Oracle Solaris 11 (64-bit)
UUID: bc04dd64-c868-4304-a3b7-eff6d66f862e
Config file: C:\Users\sbsa\VirtualBox VMs\nbolapptest\nbolapptest.vbox
Snapshot folder: C:\Users\sbsa\VirtualBox VMs\nbolapptest\Snapshots
Log folder: C:\Users\sbsa\VirtualBox VMs\nbolapptest\Logs
Hardware UUID: bc04dd64-c868-4304-a3b7-eff6d66f862e
Memory size: 8192MB
Page Fusion: off
VRAM size: 12MB
CPU exec cap: 100%
HPET: off
Chipset: piix3
Firmware: BIOS
Number of CPUs: 2
PAE: off
Long Mode: on
CPUID Portability Level: 0
CPUID overrides: None
Boot menu mode: message and menu
Boot Device (1): Floppy
Boot Device (2): DVD
Boot Device (3): HardDisk
Boot Device (4): Not Assigned
ACPI: on
IOAPIC: on
Time offset: 0ms
RTC: UTC
Hardw. virt.ext: on
Nested Paging: on
Large Pages: on
VT-x VPID: on
VT-x unr. exec.: on
Paravirt. Provider: Default
State: running (since 2016-11-07T11:40:20.291000000)
Monitor count: 1
3D Acceleration: off
2D Video Acceleration: off
Teleporter Enabled: off
Teleporter Port: 0
Teleporter Address:
Teleporter Password:
Tracing Enabled: off
Allow Tracing to Access VM: off
Tracing Configuration:
Autostart Enabled: off
Autostart Delay: 0
Default Frontend:
Storage Controller Name (0): SATA
Storage Controller Type (0): IntelAhci
Storage Controller Instance Number (0): 0
Storage Controller Max Port Count (0): 30
Storage Controller Port Count (0): 2
Storage Controller Bootable (0): on
SATA (0, 0): C:\Users\sbsa\VirtualBox VMs\nbolapptest\box-disk1.vmdk (UUID: 03b32e37-f77c-456c-a4e9-fe6753d87761)
SATA (1, 0): Empty
NIC 1: MAC: 080027015DD9, Attachment: NAT, Cable connected: on, Trace: off (file: none), Type: 82540EM, Reported speed: 0 Mbps, Boot priority: 0, Promisc Policy: deny, Bandwidth group: none
NIC 1 Settings: MTU: 0, Socket (send: 64, receive: 64), TCP Window (send:64, receive: 64)
NIC 1 Rule(0): name = ssh, protocol = tcp, host ip = 127.0.0.1, host port = 2222, guest ip = , guest port = 22
NIC 1 Rule(1): name = tcp1521, protocol = tcp, host ip = , host port = 1521, guest ip = , guest port = 1521
NIC 1 Rule(2): name = tcp6000, protocol = tcp, host ip = , host port = 6000, guest ip = , guest port = 6000
NIC 1 Rule(3): name = tcp8080, protocol = tcp, host ip = , host port = 2200, guest ip = , guest port = 8080
NIC 1 Rule(4): name = tcp9043, protocol = tcp, host ip = , host port = 9043, guest ip = , guest port = 9043
NIC 1 Rule(5): name = tcp9060, protocol = tcp, host ip = , host port = 9060, guest ip = , guest port = 9060
NIC 1 Rule(6): name = tcp9443, protocol = tcp, host ip = , host port = 9443, guest ip = , guest port = 9443
NIC 2: MAC: 0800272C9857, Attachment: Bridged Interface 'Intel(R) Ethernet Connection (2) I219-LM', Cable connected: on, Trace: off (file: none), Type: 82540EM, Reported speed: 0 Mbps, Boot priority: 0, Promisc Policy: deny, Bandwidth group: none
NIC 3: disabled
NIC 4: disabled
NIC 5: disabled
NIC 6: disabled
NIC 7: disabled
NIC 8: disabled
Pointing Device: USB Tablet
Keyboard Device: PS/2 Keyboard
UART 1: disabled
UART 2: disabled
LPT 1: disabled
LPT 2: disabled
Audio: enabled (Driver: DSOUND, Controller: AC97, Codec: STAC9700)
Clipboard Mode: disabled
Drag and drop Mode: disabled
Session name: headless
Video mode: 1024x768x32 at 0,0 enabled
VRDE: disabled
USB: enabled
EHCI: disabled
XHCI: disabled
USB Device Filters:
<none>
Available remote USB devices:
<none>
Currently Attached USB Devices:
<none>
Bandwidth groups: <none>
Shared folders:
Name: 'vagrant', Host path: 'D:/nBOL_VMS/nbolapptest' (machine mapping), writable
VRDE Connection: not active
Clients so far: 0
Video capturing: not active
Capture screens: 0
Capture file: C:\Users\sbsa\VirtualBox VMs\nbolapptest\nbolapptest.webm
Capture dimensions: 1024x768
Capture rate: 512 kbps
Capture FPS: 25
Guest:
Configured memory balloon size: 0 MB
OS type: Solaris_64
Additions run level: 2
Additions version: 4.3.18 r96516
Guest Facilities:
Facility "VirtualBox Base Driver": active/running (last update: 2016/11/07 11:41:19 UTC)
Facility "VirtualBox System Service": active/running (last update: 2016/11/07 11:41:47 UTC)
Facility "Seamless Mode": not active (last update: 2016/11/07 11:41:19 UTC)
Facility "Graphics Mode": not active (last update: 2016/11/07 11:41:19 UTC)
Он показывает все детали, когда над командами выполняются задания jenkins. В чем проблема.
